NOT many folks can say that they still have their first car parked in the shed. But for 31-year-old mechanic Tim Saliba, it’s a gleaming, Ice Blue reality.
“I first saw this car in 2000,” says Tim. “My sister’s boyfriend owned it. She then bought it for my brother in 2003. I remember being impressed by the five-inch monster tacho on the dash!”
This article was first published in the October 2019 issue of Street Machine
Tim says that by the time he took ownership of the car in 2004, its condition was “stock and abused”. He went about fixing it up in earnest, giving it a new coat of paint, a fresh 304ci Holden V8 and T700, VL diff, HSV brakes and Simmons FR19s. The VP was well on the way to appearing as it does today. “It was clean-as and had chrome everywhere, but it was missing the smooth engine bay,” he says. “I wanted to be able to show off every bit of my car at shows.”
In 2007, Tim made his first steps toward achieving that goal, ripping out the engine and shaving many of the lumps, bumps and holes that littered the VP’s bay. He then bolted the Holden V8 back in, complete with a Torque Power dual-plane manifold and upgraded valvetrain hardware. But its new look didn’t last long.
Read next: Blown 355-cube Holden VP Commodore - TRMN8R
Tim skipped TAFE one day and decided to go for a drive, but a noisy wheel bearing caused him to turn around and head back home. He knew he had to bite the bullet and began stripping the car down. It would be almost a decade before the VP would see the road again. “The whole rebuild is a bit of a blur now that I look back at all the countless hours, phone calls, blood, sweat and real tears,” Tim says.
Read next: LSA-powered Holden VP Calais sleeper
As happens so often with the vehicles we feature, the initial plan for ENIOL8 was a little more humble than the car you see now. Tim started a dialogue with Tony at All Cylinder Head Services with regard to slipping a new cam into his 304ci, but that plan quickly changed. “Soon we were talking about a small 355ci stroker, and with each call, the combo got bigger,” Tim says. “By that point, I knew I wasn’t going to be able to let the rest of the car slide. I wanted the VP to match all the new trends and power I was seeing in the magazines.”
Plans changed so rapidly that Tim changed intake manifolds three times before going with a billet tunnel ram he saw at Bliss Custom Machining. “I’d worked my way through a series of single- and dual-plane manifolds, but the new engine I had really needed more air flow,” he says. So Tim had Andrew at Bliss modify the design to remove the thermostat housing in favour of two –12 fittings and an electric water pump, as well as setting it up to run a pair of four-barrel EFI throttles and injectors. Combined with a pair of 4150 alloy throttle spacers and custom one-piece air filter bases, the result is almost blinding.
Tim’s first engine combo made a very healthy 600hp with a static compression of 11.5:1 on PULP, but once it was back in the car and strapped to a chassis dyno, the mill lost oil pressure. “The engine was stripped and fitted with 14:1-comp Wiseco dome-top pistons and the cylinder port size was increased; capacity is now 383ci. It also runs on E85 now,” he says. “I spent some $10K with four different tuners. I could have bought a tow truck with the money I’ve spent on towing the car around!”
Commodore engine bays don’t come much cleaner than this. Fully shaved and also boasting boxed-in headlights, smoothed rails, smoothed radiator support and a fully sheet metal-lined under-bonnet area, it makes the perfect home for the gleaming 640hp, 383ci high-comp Holden V8
Tim finally struck gold with Joe at Hi Comp Performance. “I’ve had so many issues with driveability from what other tuners were able to do, but Joe was able to get it making healthy numbers at the wheels through the 5000rpm stall,” he says.
This gorgeous billet tunnel ram set-up from Bliss Custom Machining was a custom unit with a deleted thermostat housing and made for EFI. It features twin 750cfm EFI throttles, 1000cc injectors, one-piece billet air filter hardware and custom hard lines – not to mention those bespoke throttle spacers that include Tim’s daughter’s name
With so much attention given to the engine and driveline (which includes a built T400, aforementioned stall and VL BorgWarner rear end with 31-spline billet Moser axles and 3.89:1 gears), it’d be easy to forget about the rest of the car, but it’s now one slick-looking VP, dressed in a genuine HSV Senator kit and PPG Ice Blue paint. It’s come a long way from “stock and abused”. The body can sit pretty much flat with the ground thanks to the front and rear airbag kit, and every bushing, nut and bolt under the car has been replaced. Upgraded sway-bars, adjustable front castor arms and Panhard bar complete the picture.
Inside, virtually everything save for the floor and rooflining has been covered in shale leather, including the Momo tiller, four Recaro buckets, door trims, centre console and dash. It makes for a nice contrast to the blue exterior.
Shale-coloured leather covers everything in here, including the door trims, dash and centre console. Four genuine Recaro buckets provide the seating, while an extensive audio set-up – including two large subs in the trimmed boot space – struggles to be heard over the twin 3in exhaust that dumps at the diff
So has the effort and trauma been worth it? “Look, I spent $18,000 with one workshop, only to have to have all that work re-done. The engine failure hurt too,” Tim says. “But yeah, I love it.”
With a long list of trophies to the VP’s credit, including Best in Show at both the 2019 Australian Burnout Championships and Brashernats, and Best Street Machine at the 2019 Hot Rod & Custom Auto Expo, it’s clear that the judges love it too.
1993 HOLDEN COMMODORE
Colour: PPG Ice Blue metallic
Type: Holden 383ci V8
Inlet: Bliss Custom Machining billet tunnel ram, dual 750cfm four-barrel EFI throttles, 1000cc injectors
Crank: Sainty Engineering 383ci
Pistons: Wiseco high-comp
Heads: COME Racing 590-series alloy
Cam: Solid-roller, 0.670in lift
Lifters: Crower solid
Valves: Ferrea stainless, Isky double valve springs
Ignition: Haltech Platinum Sport 2000 ECU, Haltech WB1, ICE Ignition dizzy
Exhaust: Di Filippo custom 4-into-1 headers, twin 3in stainless exhaust, SMB mufflers
’Box: Turbo 400, manualised valvebody, heavy-duty clutch pack, upgraded sprag, 5000rpm Dominator stall
Diff: VL BorgWarner, 31-spline billet Moser axles, Harrop Truetrac, 3.89:1 final drive, custom 3in two-piece tailshaft
Front suspension: Adjustable castor arms, VL manual steering conversion, airbags, Nolathane sway-bar
Rear suspension: Nolathane Panhard bar, airbags, Nolathane sway-bar
Brakes: AP Racing/HSV four-piston calipers and DBA T3 detachable-hub rotors (f), AP Racing/HSV four-piston calipers and DBA slotted rotors (r); Wilwood master cylinder, remote booster
Wheel: Momo Carbon
Seats: Recaro buckets w/shale leather
Gauges: Auto Meter Cobalt
Sounds: Clarion fold-out source unit, Helix front and rear splits, Rockford Fosgate power amp, Alpine Type-S subs
Rims: Simmons FR19; 19x8.5 (f), 19x9.5 (r)
Rubber: Kumho KU31; 235/30/19 (f), 265/30/19 (r)
Lowe Fabrications; Hi Comp Performance; All Cylinder Head Services; J Performance; Car-Nect Fluids; On The Brakes; Motorsport Connections; Gear Exchange Services; Ultimate Metalworks; Custom Whitewalls; Adept Metal Polishing; Dr Stitch Customs; Extreme Body Works; PMR Automotive; Joe Blo Speed Shop; Gary’s Motor Trimming; Top End Interiors; Performance Exhaust Centre; Black Track Towing; Competition Coatings; Long Street Automotive