The Georgia, USA-based engine builder has taken more Engine Masters wins than most of us have had hot dinners, and he was the number-one choice for Hunter Valley resident Chris Lewis when he went shopping for a new donk.
This article was first published in the July 2020 issue of Street Machine
“My car is a ’74-model XB Fairmont GS coupe, which was originally white with a 302ci,” says Chris. “I didn’t have the original motor, so I started wondering what I could fit in there. I didn’t want solid lifters or a really revvy race-style motor, or anything that was going to need a lot of maintenance. I’ve followed Jon Kaase for a while and I had the cash there for one of his engines, so I decided to pull the trigger.”
What Chris ordered is a seriously wild piece of kit, polished front to back and top to bottom and making 1000 naturally aspirated, pump gas-chugging, electronically port-injected ponies. It is based around an iron A460 Ford Motorsport block, which Chris had specced to his individual requirements.
“Jon asked me heaps of questions about exactly how I wanted my motor,” he says. “It is a crate motor, but it’s essentially custom-made, as I wanted it built to go into a car that is a real street driver, and I’m putting a Tremec T56 Magnum six-speed manual behind it. This meant Kaase had to change some of the specs to suit, like opting for a hydraulic-roller cam.”
Inside the 10.30in deck-height Ford Motorsport block is a 4.5in-stroke forged 4340 Scat crank, Scat 6.7in H-beam rods and Diamond 4.6in-bore pistons pushing 11:1 compression. A custom-grind Comp hydraulic-roller cam works on Kaase’s own Z-bar lifters and Trend pushrods that glide in Kaase Boss Nine alloy heads.
Modelled off Ford’s famous Boss 429 ‘semi-Hemi’ Shotgun heads (used to great effect in NASCAR) but improved with modern technology, the Boss Nine heads feature deep-breathing 2.30in inlet valves and 1.90in exhaust valves, with WW Engineering 1.75:1-ratio shaft-mount rockers.
On top of the Kaase EFI intake manifold is a Wilson throttlebody wired for Holley EFI, with the whole package polished to a fine shine, including the front drive accessories and cast rocker covers. A Kaase aluminium oil pump and custom oil pan handle the black gold and ensure the big-inch Boss will fit in the XB’s engine bay – a task made easier thanks to Ryan Carter and the United Speed Shop boys fitting one of their trick Magnum IFS front ends. Behind the big-block is a triple-plate carbon Tilton race clutch in a Quick Time bellhousing, and it will have a heck of a job holding the Kaase Boss Nine’s monstrous output.
All up, the big six-hunge made 1000hp on the engine dyno at just 6800rpm, twisting out 860lb-ft. “It has heaps down low,” Chris enthuses. “I really cannot wait to get in and drive it, and that is what the whole car has been built for: to drive.”
THE Kaase Boss Nine is based on Ford’s classic Boss 429 ‘Shotgun’ motor of 1969-70. While Ford had previously offered 427, 428 and 429ci big-block V8s, the Shotgun was a wildly different beast. Designed as Ford’s version of the Chrysler Hemi, it was sold only in limited-edition Mustangs to homologate the engine for use in the Ford Torinos being run in NASCAR.
How are you finding our new site design? Tell us in the comments below or send us your thoughts at firstname.lastname@example.org.
Street Machine is the bible of Aussie modified auto culture, celebrating wild muscle cars, customs and hot rods – and the incredible humans who create them.
Tim McEwan's big-block Holden HQ
We caught up with Tim McEwan and his tough big-block HQ at the recent South Coast 660
Holden 355-powered 1970 HG ute streeter
A decade after selling his HG ute, Scott McPherson got a rare second chance with it. The result is a killer plastic-powered streeter
80-year-old burnout competitor Lorraine 'Nan' Tuckett
At 80 years young, it’s fair to say Lorraine ‘Nan’ Tuckett is a bit of a latecomer to the burnout scene